TimeSync1-GPS
Surprisingly many intersection traffic lights don’t stay synchronized impeding traffic flow, irritating drivers and wasting the signal shop’s time. ELTEC’s TimeSync1-GPS provides the easy and very economical solution for preventing drifting intersection controllers.
BENEFITS
-
Easy Installation: Power, Ground & Time Reset Input
-
Simple User Interface—No Switches or Jumpers
-
Easy to Program: 6 Parameters
-
No Trenching
-
Affordably Priced
Programming is done using an uncomplicated, easy to reach thumbwheel with only a few parameters to configure: hour, minute, time zone, frequency of reset, and rising or falling edge reset. The time selection is flexible with the user selecting the hour and minute for reset. Should the AC power to the controller be exceedingly “dirty” causing the controller’s clock to drift dramatically, resets can be done every hour. Alternatively, resets can be programmed for every 3, 6, 12 hours or just once a day.
The time reset input function is accurate to 100 milliseconds and cannot be interrupted even when navigating the programming menus. The memory is nonvolatile, retaining the programming with loss of power.
The TimeSync1-GPS runs off of 8-40 volts DC. Because it uses the intersection controller’s power and GPS technology, no trenching between controllers is required.
The TimeSync1-GPS automatically adjusts to daylight savings time and has a programming option to disable DST should you live in an area that does not observe it (Arizona & Hawaii for example.)
Installation is simple with three wires: power, ground and the time reset input connections, and comes ready-to-install. See Installation & Programming Instructions
FEATURES
- Uses the Traffic Controller’s Time Reset Input
- Flexible Time Selection: schedule the hour & minute for reset
- Reset Options: schedule 1, 3, 6, 12 or 24 Times a Day
- Easy to Configure—6 Parameters: hour, minute, time zone, reset frequency, falling or rising edge trigger
- Time Reset Cannot be Interrupted while Navigating Menus
- Nonvolatile Memory: program retained with power loss
- Flexible Power: runs off 8-40 volts DC
- All Solid State: no moving parts
- Passive: no transmitting equipment
- Automatically Adjusts to Daylight Savings Time
- Option to Disable Daylight Savings Time
- Easy to Read High Contract LCD Screen
TimeSync1-GPS SPECIFICATIONS
Dimensions……………………………....……4” H x 5 ½ ” W x 1 ¼ ” D
Input Voltage Range……………………...8 volts DC to 40 volts DC
Power………………………………………………………...8-40 VDC, 100 mA
Control.…….…………………………...Isolated Open Collector Output